| MODEL | Description | Number of full bridges | Vs(Min)-Vs(Max) | RMS output current(A) | peak current | RDS(ON) (HS + LS)(mOhms) | Control interface | Package |
|---|---|---|---|---|---|---|---|---|
| MS41908M | Camera lens focus 、Automatic aperture drive,256 subdivision steps | 5 | 3V - 5.5V | 300mA | 400mA | 2500mΩ& 3300mΩ | SPI | QFN44 |
| MS41928M | Camera lens focus 、Automatic aperture drive,256 subdivision step, 1.8V interface | 5 | 3V - 5.5V | 500mA | 650mA | 1600mΩ& 3600mΩ | SPI | QFN44 |
| MS41938M | Camera lens focus 、Automatic aperture drive,256 subdivision step, 1.8V interface, support passive crystal | 5 | 3V - 5.5V | 500mA | 650mA | 1600mΩ& 3600mΩ | SPI | QFN44 |
| MS41909 | Built-in 256 subdivision、dual channel low voltage stepper motor driver | 4 | 3V - 5.5V | 500mA | 600mA | 1500mΩ& 1000mΩ | SPI | QFN44 |
| MS41919 | Built-in 256 subdivision、dual channel low voltage stepper motor driver (with IR-cut driverl) | 5 | 3V - 5.5V | 500mA | 600mA | 1500mΩ& 1000mΩ | SPI | QFN44 |
| MS41929 | Built-in 256 subdivision、dual channel low voltage stepper motor drive, support passive crystal oscillator (with IR-CUT drive) | 5 | 3V - 5.5V | 500mA | 600mA | 1500mΩ& 1000mΩ | SPI | QFN32 |
| MS41939 | Built-in 256 subdivision、single channel low voltage stepper motor driver (with IR-CUT drive) | 3 | 3V - 5.5V | 500mA | 600mA | 1500mΩ& 1000mΩ | SPI | QFN24 |
| MS41949 | Built-in 256 subdivision、four channel low voltage stepper motor drive (with IR-CUT drive) | 9 | 4V - 5.5V | 500mA | 1A | 1530mΩ | SPI | QFN48 |
| MS41968 | Built-in 256 subdivision、 integrated automatic aperture drive, four-channel stepper motor drive, two-channel DC motor drive, four-channel LED drive, support 1.8V interface, support passive crystal oscillator | 10 | 3V - 5.5V | 400mA | 500mA | 1100mΩ | SPI | QFN88 |
| MS41959 | Built-in 256 subdivision 4CH stepper motor driver (with IR-cut driverl) | 9 | 4V - 5.5V， 7V -13.5V | 500mA，1A | 1A, 1.5A | 1530mΩ &620m;Ω | SPI | QFN48 |
| MS41969 | Built-in 256 subdivision 2CH high voltage stepper motor driver (with IR-cut driverl) | 5 | 7V -13.5V | 1A | 1.5A | 620mΩ | SPI | QFN36 |
| MS35009 | Digital camera lens motor drive,7CH, including DC motor and voice coil motor drive | 7 | 2.7V - 5.5V | 500mA | 0.8A | 1500mΩ | SPI | QFN44 |
| MS32006 | Motor drive of shaking machine ,5CH, low cost, support 1.8V interface | 5 | 3V - 5.5V | 500mA | —— | 1000mΩ | SPI | QFN24 |
| MS32007 | Bobblehead motor drive, 5 channels, low cost, support 1.8V interface, IIC control, built-in system clock | 5 | 3V - 5.5V | 500mA | —— | 1000mΩ | IIC | QFN24 |
| MS32008N/N1 | Head shaking machine motor drive, 5 channels, low cost,Supports 1.8V interface, 256 subdivisions, I2C control, built-in system clock | 5 | 3V - 5.5V | 500mA | —— | 1200mΩ | I2C | QFN24/QFN20 |
| MS3988N | 2CH stepper motor driver,high voltage | 4 | 8V - 36.0V | 800mA | 1.2A | 1400mΩ | PWM | QFN36 |
| MS3989/N | Low stopping noise 2CH stepper motor driver,high voltage, silent optimization during shutdown | 4 | 8V - 36.0V | 800mA | 1.2A | 1400mΩ | PWM | TQFP48/ QFN36 |
| MS3999 | Built-in 8bit DACLow stopping noise stepper motor driver,high voltage, IIC interface | 4 | 8V - 36.0V | 800mA | 1.2A | 1400mΩ | IIC | TQFP48 |
| MS35639PE | I2C interface control, Built-in 8bit DAC, low shutdown noise dual stepper motor drive | 4 | 8V - 36.0V | 800mA | 1.2A | 1000mΩ | I2C | TQFP48 |
| MS35631/N | Low stop noise dual step motor drive, high voltage | 4 | 8V - 36.0V | 800mA | 1.2A | 1000mΩ | PWM | TQFP48/QFN36 |
| MS35632N/ΔMS35632P | Low stop noise dual step motor drive, high voltage, stop silent optimization | 4 | 8V - 36.0V | 800mA | 1.2A | 1000mΩ | PWM | QFN36/TQFP48 |
| MS35633N | Low shutdown noise dual stepper motor drive, high voltage,Shutdown mute optimization, overcurrent protection | 4 | 8V - 50V | 1.4A | 2.0A | 500mΩ | PWM | QFN36 |
| MS35612/N | Low stop noise dual stepper motor drive, high voltage, shutdown mute optimization, overcurrent protection | 4 | 8V - 36V | 1A | 1.2A | 1000mΩ | PWM | TQFP48 /QFN36 |
| MS35656N | Low shutdown noise single circuit stepper motor drive, high voltage, Shutdown mute optimization, overcurrent protection | 2 | 7V - 30V | 1.4A | 2A | 500mΩ | PWM | QFN28 |
| MS35657/N | Low shutdown noise single circuit stepper motor drive, high voltage, Shutdown mute optimization, overcurrent protection | 2 | 7V - 30V | 1.4A | 2A | 490mΩ | PWM | eTSSOP28/ QFN28 |
| MS35776/ MS35776A | Built-in 256 subdivision stepper motor drive, ultra-low noise high-voltage stepper motor, speed adaptive torque adjustment, built-in mos, with mode switching control pin | 2 | 4.7V - 36.0V | 1.4A | 2A | 570mΩ | step/dir | QFN28 |
| MS4988B | Built-in 16 subdivision 1CH stepper motor driver | 2 | 7V - 35.0V | —— | 1.5A | 730mΩ | step/dir | QFN28 |
| MS4989 | Built-in 16 subdivision 1CH stepper motor driver,up to 16 subdivisions | 2 | 7V - 35.0V | —— | 2A | 750mΩ | step/dir | TSSOP28 |
| MS35774/ MS35774A | Built-in 256 subdivision stepper motor drive | 2 | 4.7V - 36.0V | 1.4A | 2A | 570mΩ | step/dir | QFN28 |
| MS4998 | Built-in 256 subdivision 1CH stepper motor driver,adjustable decay time | 2 | 7V - 35.0V | —— | 2A | 750mΩ | step/dir | TSSOP28 |
| MS35711TE | Built-in 256 subdivision stepper motor driver, current mode | 2 | 8V-60V | —— | —— | —— | SPI | TSSOP38/PP |
| MS35930 | Built-in 256 subdivision stepper motor driver | 2 | 4.75V - 36.0V | 1A | 2.5A | 570mΩ | step/dir，uart,spi | TQFP48 |
| MS31805TE | Single pole stepper motor drive, 4 low side power drives, built-in high side freewheeling diode | 4 | 7.2V - 50V | 1.4A | 2A | 420mΩ | STEP/DIR | eTSSOP16 |
| MS35229N | Built-in 256 subdivision microstepper with instruction register, low noise and low vibration, built-in system clock | 2 | 4V - 15V | 1A | 1.4A | 1Ω | I2C | QFN16 |
| MS35230TE | Built-in 256 subdivision microstepper with instruction register, low noise and low vibration, built-in system clock | 2 | 4V - 15V | 1A | 1.4A | 1Ω | I2C | eTSSOP16 |
