| MODEL |
Description |
Number of full bridges |
Vs(Min)-Vs(Max) |
RMS output current(A) |
peak current |
RDS(ON) (HS + LS)(mOhms) |
Control interface |
Package |
| MS41908M |
Camera lens focus 、Automatic aperture drive,256 subdivision steps |
5 |
3V - 5.5V |
300mA |
400mA |
2500mΩ& 3300mΩ |
SPI |
QFN44 |
| MS41928M |
Camera lens focus 、Automatic aperture drive,256 subdivision step, 1.8V interface |
5 |
3V - 5.5V |
500mA |
650mA |
1600mΩ& 3600mΩ |
SPI |
QFN44 |
| MS41938M |
Camera lens focus 、Automatic aperture drive,256 subdivision step, 1.8V interface, support passive crystal |
5 |
3V - 5.5V |
500mA |
650mA |
1600mΩ& 3600mΩ |
SPI |
QFN44 |
| MS41909 |
Built-in 256 subdivision、dual channel low voltage stepper motor driver |
4 |
3V - 5.5V |
500mA |
600mA |
1500mΩ& 1000mΩ |
SPI |
QFN44 |
| MS41919 |
Built-in 256 subdivision、dual channel low voltage stepper motor driver (with IR-cut driverl) |
5 |
3V - 5.5V |
500mA |
600mA |
1500mΩ& 1000mΩ |
SPI |
QFN44 |
| MS41929 |
Built-in 256 subdivision、dual channel low voltage stepper motor drive, support passive crystal oscillator (with IR-CUT drive) |
5 |
3V - 5.5V |
500mA |
600mA |
1500mΩ& 1000mΩ |
SPI |
QFN32 |
| MS41939 |
Built-in 256 subdivision、single channel low voltage stepper motor driver (with IR-CUT drive) |
3 |
3V - 5.5V |
500mA |
600mA |
1500mΩ& 1000mΩ |
SPI |
QFN24 |
| MS41949 |
Built-in 256 subdivision、four channel low voltage stepper motor drive (with IR-CUT drive) |
9 |
4V - 5.5V |
500mA |
1A |
1530mΩ |
SPI |
QFN48 |
| MS41968 |
Built-in 256 subdivision、 integrated automatic aperture drive, four-channel stepper motor drive, two-channel DC motor drive, four-channel LED drive, support 1.8V interface, support passive crystal oscillator |
10 |
3V - 5.5V |
400mA |
500mA |
1100mΩ |
SPI |
QFN88 |
| MS41959 |
Built-in 256 subdivision 4CH stepper motor driver (with IR-cut driverl) |
9 |
4V - 5.5V， 7V -13.5V |
500mA，1A |
1A, 1.5A |
1530mΩ &620m;Ω |
SPI |
QFN48 |
| MS41969 |
Built-in 256 subdivision 2CH high voltage stepper motor driver (with IR-cut driverl) |
5 |
7V -13.5V |
1A |
1.5A |
620mΩ |
SPI |
QFN36 |
| MS35009 |
Digital camera lens motor drive,7CH, including DC motor and voice coil motor drive |
7 |
2.7V - 5.5V |
500mA |
0.8A |
1500mΩ |
SPI |
QFN44 |
| MS32006 |
Motor drive of shaking machine ,5CH, low cost, support 1.8V interface |
5 |
3V - 5.5V |
500mA |
—— |
1000mΩ |
SPI |
QFN24 |
| MS32007 |
Bobblehead motor drive, 5 channels, low cost, support 1.8V interface, IIC control, built-in system clock |
5 |
3V - 5.5V |
500mA |
—— |
1000mΩ |
IIC |
QFN24 |
| MS32008N/N1 |
Head shaking machine motor drive, 5 channels, low cost,Supports 1.8V interface, 256 subdivisions, I2C control, built-in system clock |
5 |
3V - 5.5V |
500mA |
—— |
1200mΩ |
I2C |
QFN24/QFN20 |
| MS3988N |
2CH stepper motor driver,high voltage |
4 |
8V - 36.0V |
800mA |
1.2A |
1400mΩ |
PWM |
QFN36 |
| MS3989/N |
Low stopping noise 2CH stepper motor driver,high voltage, silent optimization during shutdown |
4 |
8V - 36.0V |
800mA |
1.2A |
1400mΩ |
PWM |
TQFP48/ QFN36 |
| MS3999 |
Built-in 8bit DACLow stopping noise stepper motor driver,high voltage, IIC interface |
4 |
8V - 36.0V |
800mA |
1.2A |
1400mΩ |
IIC |
TQFP48 |
| MS35639PE |
I2C interface control, Built-in 8bit DAC, low shutdown noise dual stepper motor drive |
4 |
8V - 36.0V |
800mA |
1.2A |
1000mΩ |
I2C |
TQFP48 |
| MS35631/N |
Low stop noise dual step motor drive, high voltage |
4 |
8V - 36.0V |
800mA |
1.2A |
1000mΩ |
PWM |
TQFP48/QFN36 |
| MS35632N/ΔMS35632P |
Low stop noise dual step motor drive, high voltage, stop silent optimization |
4 |
8V - 36.0V |
800mA |
1.2A |
1000mΩ |
PWM |
QFN36/TQFP48 |
| MS35612/N |
Low stop noise dual stepper motor drive, high voltage, shutdown mute optimization, overcurrent protection |
4 |
8V - 36V |
1A |
1.2A |
1000mΩ |
PWM |
TQFP48 /QFN36 |
| MS35656N |
Low shutdown noise single circuit stepper motor drive, high voltage, Shutdown mute optimization, overcurrent protection |
2 |
7V - 30V |
1.4A |
2A |
500mΩ |
PWM |
QFN28 |
| MS35657/N |
Low shutdown noise single circuit stepper motor drive, high voltage, Shutdown mute optimization, overcurrent protection |
2 |
7V - 30V |
1.4A |
2A |
490mΩ |
PWM |
eTSSOP28/ QFN28 |
| MS35776/ MS35776A |
Built-in 256 subdivision stepper motor drive, ultra-low noise high-voltage stepper motor, speed adaptive torque adjustment, built-in mos, with mode switching control pin |
2 |
4.7V - 36.0V |
1.4A |
2A |
570mΩ |
step/dir |
QFN28 |
| MS4988B |
Built-in 16 subdivision 1CH stepper motor driver |
2 |
7V - 35.0V |
—— |
1.5A |
730mΩ |
step/dir |
QFN28 |
| MS4989 |
Built-in 16 subdivision 1CH stepper motor driver,up to 16 subdivisions |
2 |
7V - 35.0V |
—— |
2A |
750mΩ |
step/dir |
TSSOP28 |
| MS35774/ MS35774A |
Built-in 256 subdivision stepper motor drive |
2 |
4.7V - 36.0V |
1.4A |
2A |
570mΩ |
step/dir |
QFN28 |
| MS4998 |
Built-in 256 subdivision 1CH stepper motor driver,adjustable decay time |
2 |
7V - 35.0V |
—— |
2A |
750mΩ |
step/dir |
TSSOP28 |
| MS35711TE |
Built-in 256 subdivision stepper motor driver, current mode |
2 |
8V-60V |
—— |
—— |
—— |
SPI |
TSSOP38/PP |
| MS35930 |
Built-in 256 subdivision stepper motor driver |
2 |
4.75V - 36.0V |
1A |
2.5A |
570mΩ |
step/dir，uart,spi |
TQFP48 |
| MS31805TE |
Single pole stepper motor drive, 4 low side power drives, built-in high side freewheeling diode |
4 |
7.2V - 50V |
1.4A |
2A |
420mΩ |
STEP/DIR |
eTSSOP16 |
| MS35229N |
Built-in 256 subdivision microstepper with instruction register, low noise and low vibration, built-in system clock |
2 |
4V - 15V |
1A |
1.4A |
1Ω |
I2C |
QFN16 |
| MS35230TE |
Built-in 256 subdivision microstepper with instruction register, low noise and low vibration, built-in system clock |
2 |
4V - 15V |
1A |
1.4A |
1Ω |
I2C |
eTSSOP16 |
