| MODEL |
Description |
Number of full bridges |
Vs(Min)-Vs(Max) |
RMS output current(A) |
peak current |
RDS(ON) (HS + LS)(mOhms) |
Control interface |
Package |
| MS3111D |
Single channel low-voltage full bridge drive, low cost |
1 |
1.8V - 6V |
0.8A |
1A |
850mΩ |
IN1/IN2 |
DFN8/ SOT23-6 |
| MS3111S |
Single channel low-voltage full bridge drive, low cost |
1 |
1.8V - 6V |
0.8A |
1A |
850mΩ |
IN1/IN2 |
DFN8/ SOT23-6 |
| MS31051S/D |
Single independent full bridge, low cost, single channel, high current |
1 |
1.8V - 6V |
1.2A |
1.8A |
480mΩ |
IN1/IN2 |
SOT23-6/ DFN8 |
| MS3010 |
Single channel low-voltage full bridge drive, low cost |
1 |
1.8V - 6V |
0.8A |
1A |
850mΩ |
IN1/IN2 |
SOP8 |
| MS3112 |
Dual channel low-voltage full bridge drive, low cost |
2 |
1.8V - 6V |
0.8A |
1A |
850mΩ |
IN1/IN2 |
eTSSOP16 |
| MS3114 |
Four channel low-voltage full bridge drive, low cost |
4 |
1.8V - 6V |
0.8A |
1A |
850mΩ |
IN1/IN2 |
QFN24 |
| MS31001D |
Single channel low-voltage full bridge drive with low current hold mode |
1 |
2.0V - 5.5V |
0.8A |
1A |
1130mΩ |
IN1/IN2 |
DFN8 |
| MS31011D |
Single channel low-voltage full bridge drive with locked rotor detection |
1 |
2.0V - 5.5V |
0.8A |
1A |
1130mΩ |
IN1/IN2 |
DFN8 |
| MS31010S |
Single channel low-voltage full bridge drive, single line pulse control |
1 |
2.0V - 6V |
0.85A |
1.2A |
1130mΩ |
IN |
SOT23-6 |
| MS8837 |
Single channel 12V full bridge drive, working voltage as low as 1.8V, sleep pin control |
1 |
1.8V - 12V |
—— |
1.2A |
420mΩ |
IN1/IN2 |
DFN8 |
| MS8838 |
Single channel 12V full bridge drive, working voltage as low as 1.8V, sleep pin control |
1 |
1.8V - 12V |
—— |
1.4A |
420mΩ |
PH/EN |
DFN8 |
| MS3122 |
Dual channel 12V full bridge drive, with a working voltage as low as 1.8V |
2 |
1.8V - 12V |
1A |
1.3A |
520mΩ |
IN1/IN2 |
eTSSOP16 |
| MS3142/S |
Dual full bridge, small package, simple peripheral design |
2 |
4V - 18V |
1.1A |
1.5A |
850mΩ |
IN1/IN2 |
MSOP10PP/ SSOP10 |
| MS3145D |
Dual full bridge, small package, simple peripheral design |
2 |
4V - 18V |
1.1A |
1.5A |
850mΩ |
PH/EN |
DFN12 |
| MS8844 |
Four independent half bridge ,High current with over current protection |
2 |
7.5V - 36V |
1.75A |
2.5A |
440mΩ |
EN/IN |
TSSOP28PP |
| MS8847 |
Two independent full bridge,High current with over current protection |
2 |
7.5V - 36V |
1.75A |
2.5A |
440mΩ |
IN1/IN2 |
TSSOP28PP |
| MS31221 |
Dual channel 10V full bridge drive, with a working voltage as low as 1.8V |
2 |
1.8V - 10V |
2A |
2.8A |
420mΩ |
IN1/IN2 |
QFN16 |
| MS31211 |
Single channel 10V full bridge drive, low to 1.8V working voltage, high current |
1 |
1.8V - 10V |
2.5A |
3.2A |
240mΩ |
IN1/IN2 |
eMSOP10 |
| MS31542 |
Double full bridge, small package, simple periphery |
2 |
4V - 12V |
1.1A |
1.5A |
850mΩ |
IN1/IN2 |
eMSOP10 |
